Transform Mission: Over Turn

for over run1

Long time coming, betwixt a spoiler for you. I have Power Train and yes I did combine him to get a fill for him. Power Trains review will be done later. Specifically when I get his transformation down to a science.

Back to Over Turn, Transform Missions homage to dead end. Right out the box Over Turn looks like classy model car right out the box. Also his transformation is unique and nail biter also. On this review I am going to get to first before I go into the good and bad.


The booklet he comes with does a ‘fairly’ good job but it’s far from perfect. Let me give you some needed tips. First I want to start with the combine mode. Instruction does a lack luster job on showing how to have the proper fit for the gray pegs are suppose to go.

King P4_TFM_Overrun_hAVOC 029
Here already flipped grey tab up on the waist. The peg is a c shaped thing that plugs neatly into the peg hole on the side here.
King P4_TFM_Overrun_hAVOC 030
Done right it should look like this.

King P4_TFM_Overrun_hAVOC 028

See the red post here? This is where the Havocs combiner piece plugs into. In my opinion It’s well kind of, odd but it works. To know you have solid fit you feel it sink in betwixt here a crisp snap. I highly just go easy on the first time to get a feel for it. To my amazement the plastic is pretty damn tough.

Robot mode

Pretty much Over Turn is tabby a bit. Which brings to key things on the robot transformation.

King P4_TFM_Overrun_hAVOC 031
Only issue here making sure everything is lined up before snapping it into place.

King P4_TFM_Overrun_hAVOC 032

King P4_TFM_Overrun_hAVOC 033
Loosen the arms a bit to get to this point. Next you can untab the roof of the car like so. You’ll be able to flip the hood of the car back.
King P4_TFM_Overrun_hAVOC 034
Better picture on what I am talking about.

When you get the arms, You get the picture on how Over Turn will turn into after this. However to extend the arms, once again the instruction don’t show clear way to do so. But here’s where the fore arm opens up to do so.

King P4_TFM_Overrun_hAVOC 035

Finished result

King P4_TFM_Overrun_hAVOC 036

Now let’s get to the good and bad.


Dealing with rear pieces of the car in transformation is a bit annoying, because you’re working with thin plastic. The only plus side it’s sturdy and flexible. I am not being negative but honest. On that note, he’s only a 4 days old and I still have to work out the stiffness in this transformation in regards to the front of the car and all that.


Very eye catching, sturdy QC and he poses very well

His articulation is slightly above average. I will rank up at number three right below Revolt. Also his head rotations is very dramatic up and down.


I am giving Over Turn a solid 10/ 10. Solid figure and looks great. Furthermore is fun to play with. This is all I have to say about over turn. Thanks for reading.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s